DTF A3 Black Line Printing Plotter - 1 Xp600 + Drying Oven

BLACK LINE DTF A3 PRINTING PLOTTER + DRYING OVEN DTF A3 Black Line plotter with 1 Epson XP600 print head, with powder agitator machine and oven. DTF Plotter (Direct to film) with A3/30 cm wide printing width, is a semi-industrial DTF plotter built especially for DTF. What is the DTF printing system and why is it useful for us? The DTF is a new white ink printing system that allows printing on different types of textile supports (cotton, polyester, non-woven) both in white and colours, both light and dark (and even rigid). Its main advantage is that it is more affordable than the current techniques of direct printing on textiles DTG, screen printing or transfer with white toner. The solution consisting of printing with a printer (Adapted for DTF) with special highly flexible inks on a PET Film on to which we later add polyamide adhesive powder that will be fixed to its surface after a curing process. The image printed in mirror mode on the film is later printed on the textile with a thermal press. It is a perfect technique for all those who are interested in introducing the customization of t-shirts and any other textile (cushions, masks, bags, sweatshirts... ) in your business of cotton, polyester or mix of any color making a very low investment. If you already practice the sublimation of items, DTF is a perfect complementary technique to get more economic performance from your business. Advantages: For all types of fabric Speed fast printing Easy to operate How to use: Use the printer to print the image on the PET film roll Apply the hot melt powder to the vibrating powder machine Use the heat press machine to heat the T-shirt with the PET Flim at 150 degrees for 8 seconds . Done! FEATURES: Print head: Epson XP600 Number of heads: 1 Printer size (mm): 900L x 470A x 500A Maximum print width: A3/310mm Weight: 49Kg Outer packaging size (mm): 960L x 510A x 540A Software: Default Maintop 6.1 // Photoprint choice Languages: English - Chinese Printing speed: 6 passes: 3m2/h - 8 passes: 1.5m2/h Printing precision: 360x2400 dpi, 360x3600 dpi, 720x2400 dpi. 6 passes - 8 passes. Environmental Condition: 20 - 28ºC - Relative Humidity 65% ​​- 75% Ink Type and Setting: Textile Pigment Ink Power Supply: 220V - 110V / 50HZ - 60HZ Ironing Temperature: 160 - 170ºC Three Heating Sections: Preheater, Heater printing bed, rear heater 30ºC - 65ºC*** IMPORTANT NOTICE: DTF ovens give off particulate material or smoke, the amount of smoke varies according to work levels and ambient temperature but there is always liquid evaporation and particulate matter coming out into the have contact with the hot zone of the oven, the ink and the film. If the place or room where you will install this equipment does not accept particulate matter or you must add air purifiers to this product, the use of air purifiers is recommended with all the equipment DTF****** IMPORTANT: These kits use a DTF textile ink, when it dries it remains like a plastic similar to plastisol, due to this, using the kit when finished using it requires daily cleaning of surfaces so that this ink does not remains on the objects of the printer that over time can prevent its correct operation, temperature and humidity control is required, since the liquid ink and its physical properties will be affected by temperature, these maintenance are key to the duration of the team and their productivity ***