DTF Purple printing plotter + Drying oven

DTF PRINTING PLOTTER + DRYING OVEN The high production DTF plotter equipped with Xp600 heads provides economy and speed. The printing plotter is a high-speed equipment equipped with 4 Epson XP600 heads for faster printing, it is ideal for DTF processes. What is the DTF printing system and what is it for? The DTF is a new white ink printing system that allows printing on different types of textile supports (cotton, polyester, non-woven) both white and colored, both light and dark (and even rigid). Its main advantage is that it is more affordable than current DTG direct-to-fabric printing techniques, screen printing or transfer with white toner. The solution consists of printing with a printer (Adapted for DTF) with special highly flexible inks on a PET Film on which we later add polyamide adhesive powder that will be fixed to its surface after a curing process. The image printed in mirror mode on the film is subsequently printed on the textile with a heat press. It is a perfect technique for all those who are interested in introducing the customization of t-shirts and any other textile (cushions, masks, bags, sweatshirts...) in their cotton, polyester or any color mix business with a very low investment. . If you already practice the sublimation of articles, the DTF is a perfect complementary technique to get more economic performance from your business. CHARACTERISTICS: Print head: Epson XP600 Number of heads: 2 or 4 you must select (4 heads double the speed of 2 heads) Resolution with Xp600 Maximum 2160x1080 DPI Maximum resolution with I3200 3200x2400 DPI Maximum speed with xp600 4 mt2 hour (4 heads doubles to 8 mt2 hour) Maximum speed with i3200 6 mt2 hour (4 Heads doubles to 12 mt2 hour) Size: 1380L x 900W x 1200W Printing width: 60cm Colours: CYMK+W x2 Drying oven: Yes Kiln type: First drying Exclusive Computer: i5 or higher with rj45 and dedicated video card, 8gb ram Required area: 4 m2 Total power consumption: 9000W Controlled environment required: Yes Weight: Plotter: 100Kg // Drying oven: 120Kg Software: Default Maintop - Optional Photoprint Languages: Chinese - English Printing speed: 8 steps 12 meters/h - 6 steps 16 meters/h Environmental conditions: 20 - 28ºC - Relative humidity 65% ​​- 75% Ink Type and Configuration: Textile Pigment Ink Power supply: 220V - 110V / 50HZ - 60HZ Ironing temperature: 160 - 170ºC Power: Printer: 350w - Oven: 3400W Three heating sections: Preheater, Print Bed Heater, Rear Heater 30ºC - 65ºC ***IMPORTANT NOTICE: DTF ovens give off particulate matter or smoke, the amount of smoke varies according to work levels and ambient temperature, but there is always evaporation of liquid and particulate material coming out when in contact with the hot area of ​​the oven . ink and film If the location or room where you will install this equipment does not accept particulates or if you must add air filters to this product, it is recommended to use air filters with all DTF*** ***IMPORTANT: These kits use a DTF textile ink, when it dries it looks like a plastic similar to plastisol, so using the kit after using it requires daily cleaning of the surfaces so that this ink does not remain on the surfaces. objects of the printer that over time can prevent its correct operation, temperature and humidity control is required, since the liquid ink and its physical properties will be affected by temperature, this maintenance is key to the duration of the equipment and its productivity ***